Although the electrical power used in your RV is similar to that used in your home, there are several unique properties to the 120-volt power that all RVer’s need to know.
This instructional class will walk you through, step-by-step, the key factors of your RV electrical system.
In your home, it’s simple… you turn on the coffee pot in the morning, check emails on the computer, and grab some cold milk from the refrigerator all without thinking about how the electricity makes everything work. It just comes from the pole outside, magically.
In your RV, it’s a little more complex than that! In this 120-Volt Electrical System class, you’ll see how electricity is supplied by the campground source or an RV specific generator to the rig, with the help of a distribution center.
Testing the campground source for proper voltage and polarity is important prior to hooking up your shoreline power. You’ll learn how to use a digital monitor or the less expensive analog version that also requires using a GFCI tester to check for proper wiring. Also, you’ll learn the difference in power requirements between the various power cords used in RVs.
A typical campground electrical stand, which is commonly referred to as shoreline power, will have a 15-amp plug-in with a GFCI outlet, 30-amp three-prong plug, and some will have a 50-amp 4-prong outlet that supplies two legs of 120-volt power for larger rigs. These are all controlled with a circuit breaker switch on the pedestal.
The distribution center is the heart of the 120-volt power source, and you’ll get an in-depth look at how the power comes into the center and is routed to each of the appliances and outlets through circuit breakers. Then we’ll cover how that power is used to charge the batteries through the converter which supplies the 12-volt DC system.
And finally, you’ll hear a discussion on energy management when only 30-amp power is available and troubleshooting basics – including safety tips, surge protection devices, and how to check individual amp draw of appliances and accessories.
In addition to the detailed video instruction you’ll receive, this online class provides you with some downloadable resources and helpful information to print and keep, including: A detailed Class Guide you can follow and use as a reminder for the key points of the class instruction; and a few resource documents that will help you get the most out of your 120-Volt electrical system.
FREE 6/12V Circuit Tester With 5 Ft. Lead ($7 Value)
Quickly check any 6 or 12 volt fuse with this handy circuit tester. An indicator light in the handle tells you if the circuit can carry an electrical current or not. Features include a 5 ft. lead wire and a needle point probe.
NOTE: You’ll receive this Class video instruction in two forms: As on-demand streaming video (in your RVRC Account); and as a physical DVD, mailed to you.
